I think the only way to get a RPM Signal is from the ECM, These aren't like the old autos ones that you could hook up to the coil. I'd have to look at the stock Tach to see what kind of Signal it gets from the ECM, IF it does actually get its signal from the ECM.
(Sold)2014 Orange Reeper, 2" BL, 31" MT's on ITP SS212, Daily driven like a rally car!
Blade so that gauge will work with our reeper's wiring or do we have to make changes to wiring to get it to work with reeper. I know on the Quadix model you have backup lights & some other parts that our reeper's don't have. I'm wondering if the wiring harness is the same on both models.
Last Edit: Dec 3, 2014 17:54:06 GMT -5 by redreeper
2013 red reeper 15/7" DR33 Drag rims, 235/75/15" Nanking Mudstars, 2" body lift, BOR ECU flash, BOR 2-Stage Shocks
SuperTrapp mufflers, Pyle Stereo
Probably can use the stock speed sensor. Most of these will take a multitude of different inputs Dez. I know the Digital Dakota did that I put on my bike did. You just needed to count the revs and pules per mile and adjust accordingly.